Skip to content
Malvern Lock ServicesRequest a visit
Open 24/7(289) 301-2168Call now
Detached horizontal exit device and separate strike component on a workshop bench. — Panic & Exit Hardware, Malvern

Plan ahead Commercial · Malvern

Panic & Exit Hardware in Malvern

Someone at the front counter always has to unlock the side door by hand before the lunch rush, because the round doorknob out there was never meant to be an exit for a room this size.

Call now · open 24/7(289) 301-2168

Request a visit

In plain words

A pair of doors is its own small project, and not every pair needs the same approach. Some rim-device pairs keep their mullion and latch each leaf independently with no set closing order. Where sequencing does matter, one leaf is chosen as the inactive leaf and closes first, guided by a coordinator so the active leaf's device can seat properly into the strike or into an astragal on the inactive leaf. Removing a centre mullion calls for a compatible replacement arrangement on each leaf, which can matter for wheelchair access or for moving equipment through.

Sound familiar?

The daycare wants the yard gate and the classroom door alarmed so a staff member hears the moment it opens, without turning either into something a child could be shut behind.

How the visit goes

Panic & Exit Hardware · Malvern

How the visit goes

Technician in a cap and hooded sweatshirt using a small screwdriver on the lever handle and lock case of a glass door. — Malvern
  1. 1

    Accessibility and reach at the door

    The assessment also looks at who has to operate the door: mounting height, the force needed to release the touchpad or crossbar, and whether the outside trim's lever or pull suits someone with limited grip or reach. A door that meets a code minimum can still be awkward for the people who use it every day, so this check asks not only what is required but what will work well for the staff and visitors who pass through the opening.

  2. 2

    Adding electrified functions

    Where the plan includes access control or an alarm, the wiring is run and terminated to the device without touching its mechanical exit function: a request-to-exit switch reports that the pushpad or crossbar was actuated, electric latch retraction lets an authorized signal release the latch for entry, and an alarm module sounds locally when the crossbar is used. On a fire-rated opening, electric latch retraction is arranged to relatch automatically the instant a fire-alarm signal comes in, since a fire door has to keep its active latch and cannot rely on a mechanical dogging function to do that.

  3. 3

    A pair of doors that behaves like one exit

    Where a pair was involved, both leaves now latch the way that pair's hardware was designed to: some close in a fixed order guided by a coordinator, with an astragal or a compatible vertical-rod arrangement keeping the opening reading as a single wide exit, while others latch independently on their own without needing either. Anyone walking through it day to day should notice nothing except a door that swings, closes and latches without a hand having to guide the second leaf into place.

In the van

  • Strike and reinforcement
  • Door closer
  • Request-to-exit switch
  • Signage and labels
  • Outside trim (pull, lever or cylinder)

What affects the quote

  1. 1

    Fire-rated versus non-rated opening

    A fire-rated door needs hardware specifically listed for that assembly and installed to keep the rating intact, which is more involved than fitting a standard device to a non-rated door.

  2. 2

    Single door or a pair

    A pair of doors that needs ordered closing calls for a coordinator or an astragal, and one being converted into a single wide exit needs a mullion removed and replaced with vertical-rod devices on each leaf, both of which add work beyond a single-door installation.

  3. 3

    Signage and labelling

    Any exit signage or alarm labelling the opening needs is a small addition on its own, but it is named in the quote rather than assumed to already exist on the door.

Same fees day, night or weekend.

Have it ready

Before you call · 0 / 3

(289) 301-2168

Panic & Exit Hardware: questions

Advice · (289) 301-2168

Who is responsible for keeping the hardware compliant?

The building owner or the party the owner assigns, often a facilities manager, is responsible for keeping exit hardware in working order and for the fire door assembly testing that goes with it. A locksmith installs and services the hardware and can keep records on the owner's behalf, but the ongoing duty to maintain the assembly sits with whoever holds the building.

How is occupant load actually counted for this decision?

Occupant load is calculated from the floor area and the intended use of the room, using published factors for that occupancy type, rather than a headcount taken on a busy night. A building official or a locksmith familiar with the calculation can work through it for a specific room, and the result is what decides whether the exit doors serving that room need a releasing device.

What does the finished installation actually prove to an inspector?

It proves that a specific device, rated for the opening it sits on, releases under an appropriate force, latches fully, and has been tested and recorded on a given date. The record travels with the building, so a fire inspector reviewing the space later is looking at a documented history of that exit rather than testing hardware with no known installation date or specification.

Panic & Exit Hardware near you

Toronto, Ontario

Malvern information

Town
Malvern, Toronto, Ontario
In business
20 years
Hours
Open 24/7 · nights, weekends and holidays, same fees
Visits
On-site assessment preferred. Request a visit or call.

What the census means at the door

58%

Older homes. About 58% of homes in Toronto were built in 1980 or earlier, according to the 2021 Census.

In neighbourhoods of established homes, keys have often been copied many times over many owners. Rekeying every exterior door to one fresh key is the common first job, and it works on old cylinders just as well as on new ones.

23%

Single-detached houses make up about 23% of homes in Toronto (2021 Census).

Where most homes are apartments or condos, storage lockers, bike rooms and parking gates carry their own locks. A locksmith can supply and key padlocks and cam locks for those spaces so one household ring covers everything it uses.

Source: Statistics Canada, 2021 Census of Population

Nearby

Open Malvern in Google Maps

Open 24/7

Request a visit

Someone at the front counter always has to unlock the side door by hand before the lunch rush, because the round doorknob out there was never meant to be an exit for a room this size.

Call now · open 24/7(289) 301-2168
  • On-site assessment preferred
  • Same fees day, night or weekend
  • 20 years in business